halal-certified NSF kosher

Food Grade PAO-based Compressor Lubricants

Applications: Omnilube 520, 546, 568, 5131, and 640 are synthetic food grade compressor oils that are formulated with the highest quality polyalphaolefin (PAO) base oils. Omnilube 5131 is suitable for use as an impregnating oil for powder metal sleeve bearings in small electric motors where food grade approvals are necessary. Omnilube 520, 546, and 568 are designed for rotary screw compressors and offer a service life of 2,000 to 4,000 hours under good operating conditions. Omnilube 5131 and 640 are designed for reciprocating compressors.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Vacuum Pumps, Meat & Poultry Processing Plants, Food Processing Plants, Reciprocating Compressors, Centrifugal Compressors, Omnilube 5131: Powder Metal Sleeve Bearings in Food Grade Applications, i.e. Food Processors, Blenders.

Performance Benefits: Outstanding thermal oxidative stability, Very low pour point, Wide operating temperature range, Non-detergent, Extended drain intervals / reduced oil disposal, Excellent vapor pressure characteristics, Complies with FDA 21 CFR 178.3570 H-1, Approved for use in Canada

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube 520


32 29.6 / 6.3 168 240 / 404 -68 / -90 0.83

Omnilube 546


46 45.2 / 7.8 143 260 / 500 -40 / -40 0.84

Omnilube 568


68 69.5 / 9.2 145 260 / 500 -40 / -40 0.84

Omnilube 640


150 138 / 16.0 145 260 / 500 -37 / -35 0.84

Omnilube 5131


100 108 / 10.5 145 260 / 500 -39 / -38 0.84


Back To Top

Long-Life Food Grade Compressor Oils

Applications: Omnilube 32/46, 68, and 455 are fully synthetic compressor oils formulated from the highest quality polyalphaolefin (PAO) base oils with a superior proprietary additive package to achieve long life. These long life compressor lubricants provide significantly improved wear, oxidation and lubricity over the currently available H-1 food grade synthetic oils allowing the service life to increase by 50% to 100%. Dependent upon the rotary screw design Omnilube 32/46 and 68 are able to give a service life of up to 8,000 service hours in good operating conditions. Omnilube 455 is designed for reciprocating compressors.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Reciprocating Compressors, Centrifugal Compressors, Vacuum Pumps, Meat Processing Plants, Poultry Processing Plants, Food Processing (H-1)

Performance Benefits: Outstanding wear and lubricity properties, Less varnish formation, Low pour point & high flash point, Good corrosion protection, Increase oxidative stability, Excellent compatibility with elastomers, seals, plastics, and paints, Complies with FDA 21 CFR 178.3570 H-1, Approved for use in Canada

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube 32/46


32 / 46 42.0 / 7.6 150 254 / 490 -50 / -58 0.85

Omnilube 68


68 59.7 / 9.8 150 240 / 464 -47 / -53 0.87

Omnilube 455


100 98.7 / 14.0 145 240 / 464 -44 / -48 0.85


Back To Top

Multi-purpose Food Grade Hydraulic Oils

Synthetic Multi-purpose Food Grade Hydraulic Fluids

Applications: The Omnilube FGH 1000 Series is a line of synthetic fluids blended from premium polyalphaolefin (PAO) base oils with superior additives that meet the requirements for demanding industrial hydraulic systems within the food industry. These NSF approved premium food grade hydraulic fluids are designed as multi-purpose to include a wide variety of industrial applications as well as hydraulic systems.

Typical Industrial Applications: Hydraulic Systems, Canning, Gears, Bearings, Valves, Circulating Oil, Chains, Air Line Lubricant, Meat Processing Plants, Poultry Processing Plants, Food Processing (H-1)

Performance Benefits: Reduced varnish and deposit build-up, Low evaporation rate, Wide temperature range, Substantial reduction in make-up oil, Anti-wear protection, Excellent compatibility with elastomers, seals, plastics, and paints, Complies with FDA 21 CFR 178.3570 H-1, Approved for use in Canada

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube FGH 1032


32 31.4 / 5.6 117 246 / 465 -57 / -71 0.82

Omnilube FGH 1046


46 46.0 / 7.9 127 260 / 500 -41 / -42 0.83

Omnilube FGH 1068


68 68.8 / 10.5 141 260 / 500 -41 / -42 0.84

Omnilube FGH 1100


100 93.6 / 12.9 136 260 / 500 -40 / -40 0.84

Omnilube FGH 1150


150 147 / 17.6 132 260 / 500 -37 / -35 0.85

Omnilube FGH 1022


22 22 / 4.5 116 240 / 465 -60 / -76 0.82


Back To Top

Severe Duty Food Grade Hydraulic Oils

Synthetic Multi-purpose Food Grade Hydraulic Fluids

Applications: The Omnilube FGH 2000 Series is a line of synthetic fluids blended from premium polyalphaolefin (PAO) base oils with greatly improved wear, oxidation and lubricity over currently available H-1 food grade synthetic lubricants. These FDA approved premium hydraulic fluids were designed with a proprietary additive package and are designed as multi-purpose to include a wide variety of industrial applications as well as hydraulic systems. The 2000 series offers higher performance than the 1000 series.

Typical Industrial Applications: Hydraulic Systems, Canning, Gears, Bearings, Circulating Oil, Chains, Air Lines & Valves, Meat Processing Plants, Poultry Processing Plants, Food Processing (H-1) & (H-2)

Performance Benefits: Extended lubricant life, Reduced varnish and deposit build-up, Wide temperature range, Substantial reduction in make-up oil due to low evaporation rate, Increased oxidative stability, High load anti-wear protection, Meets FDA 21 CFR 178.3570 H-2 and FDA 21 CFR 172.878 H-1, Approved for use in Canada

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube FGH 2032


32 33 / 6.5 156 240 / 465 -60 / -76 0.83

Omnilube FGH 2046


46 46 / 7.9 143 246 / 475 -54 / -65 0.84

Omnilube FGH 2068


68 68 / 10.2 137 240 / 465 -48 / -55 0.84

Omnilube FGH 2100


100 99 / 13.2 132 232 / 450 -42 / -44 0.84

Omnilube FGH 2150


150 150 / 17.6 129 238 / 460 -37 / -35 0.84


Back To Top

Food Grade Gear Lubricants

Food Grade Synthetic Gear Lubricant

Applications: The Omnilube FGG products are synthetic food grade gear oils that are formulated from premium polyalphaolefins (PAO) base fluids. These NSF approved food grade gear oils are engineered to provide superior lubrication protection and include an extra additive to improve gasket and seal characteristics.

Typical Industrial Applications: Bearings, Circulating Oil, Gear Sets, Meat Processing Plants, Worm Gears, Poultry Processing Plants, Chains, Food Processing (H-1)

Performance Benefits: Very low pour point, Wide operating temperature range, Extended drain intervals / reduced oil disposal, Excellent compatibility with elastomers, seals, plastics, and paints, Complies with FDA 21 CFR 178.3570 H-1, Approved for use in Canada

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube FGG 1100


100 93.6 / 12.9 136 232 / 450 -42 / -44 0.84

Omnilube FGG 1150


150 147 / 17.6 132 238 / 460 -37 / -35 0.85

Omnilube FGG 1320


320 319 / 30.5 132 270 / 518 -38 / -36 0.85

Omnilube FGG 1460


460 461 / 39.1 130 270 / 518 -24 / -31 0.85

Omnilube FGG 1680


680 683 / 52 130 270 / 518 -23 / -30 0.85


Back To Top

Severe-Duty Food Grade Gear Lubricants

Food Grade Synthetic Gear Lubricant

Applications: The Omnilube FGG 2000 series are synthetic severe load food grade gear oils that are formulated from the highest quality polyalphaolefins (PAO) base fluids. These NSF approved H-1 severe load gear oils are engineered to provide significantly improved wear, oxidation and lubricity over currently available H-1 food grade gear oils. These premium severe load gear lubricants are designed with a proprietary additive package to give up to 50% longer life than other synthetic H-1 lubricants. The 2000 series offers higher performance than the 1000 series.

Typical Industrial Applications: Bearings, Gear Sets including Worm Gears, Chains, Circulating Oil Meat & Poultry Processing Plants Food Processing (H-1)

Performance Benefits: Increased oxidative stability, Wide operating temperature range, -40°F to 400°F, Sever load anti-wear protection, Complies with FDA 21 CFR 178.3570 H-1

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube FGG 2100


100 99 / 13.2 132 232 / 450 -42 / -44 0.84

Omnilube FGG 2150


150 149 / 17.6 129 238 / 460 -37 / -35 0.84

Omnilube FGG 2220


220 207 / 22.2 129 262 / 504 -35 / -31 0.87

Omnilube FGG 2320


320 308 / 29.2 129 270 / 518 -33 / -27 0.85

Omnilube FGG 2460


460 445 / 37.5 127 270 / 518 -27 / -17 0.85


Back To Top

PAG Food Grade Gear Lubricants

PAG Food Grade Gear Lubricants

Applications: Omnilube PGG 150, 220, 320, 460 and 680 FG are high-temperature gear lubricants formulated from premium polyalkylene glycol (PAG)-based oils. These NSF approved H-1 severe load gear oils are engineered to provide significantly improved wear, oxidation and lubricity over currently available H-1 food grade PAO and mineral-based gear oils. These premium severe load gear lubricants are designed for use in enclosed gears, bearings, and where conditions demand the unique properties of these fluids. They may also be used in gas compression applications utilizing reciprocation, rotary screw, and centrifugal type compressors in operating conditions beyond the capabilities of other synthetic lubricants and mineral oils.

Typical Industrial Applications: Enclosed gear units: sperm helical, bevel, and worm gears, Plain and rolling contact bearings, Compressors, Chains, Egg processing equipment, Food processing (H-1)

Performance Benefits: Excellent oxidative and thermal stability, Reduced sludge and deposit formation, High flash point, Wide operating temperature range, Reduce friction, Good wear protection, Complies with FDA 21 CFR 178.3570 H-1

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube PGG 150 FG


150 150/28.99 234 284/544 -40/-40 1.05

Omnilube PGG 220 FG


220 220/36.8 218 284/544 -40/-40 1.05

Omnilube PGG 320 FG


320 320/53.8 233 284/544 -40/-40 1.05

Omnilube PGG 460 FG


460 460/77.3 248 290/554 -33/-36 1.06

Omnilube PGG 680 FG


680 680/128.5 299 290/554 -33/-36 1.06


Back To Top

Food Grade Chain Lubricants

Food Grade Synthetic Lubricant

Applications: Omnilube FGC 3100 is a synthetic food grade chain and sprocket oil formulated from polyalphaolefin (PAO) base oil and tackifier to protect a wide variety of equipment. This NSF approved premium food grade lubricant is developed with high performance antioxidants, anti-wear additives and rust inhibi- tors to exceed the challenges of modern food-processing equipment and environments. This product provides extended lubrication change intervals and will extend equipment life

Typical Industrial Applications: Low Temperature Ovens, Drive Chains, Hi/Lo Speed Chains, Mist, Spay, or Drip Lubrication Systems, Food Processing (H-1)

Performance Benefits: Wide temperature range, High degree of high temperature corrosion-oxidation stability, Low evaporation rate, Reduced maintenance cost & cleanliness, Complies with FDA 21 CFR 178.3570 H-1

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube FGC 3100


100 100 / 8.5 130 238 / 460 -37 / -35 0.85

Omnilube PG 130 FG


130 / 22 198 264 / 507 -39 / -38 0.99

Omnilube PG 220 FG


224.3 / 32.8 192 264 / 507 -29 / -20 0.99

Omnilube Trolley Lube FG


46 47.3 / 7.2 112 232 / 450 -35 / -31

Omnilube FGC 4220


223/26.9 154 281/537 -35/-31 0.98-1.0

Omnilube PC 100 FG


100 100/15 158 274/525 -15/5 0.88


Back To Top

Food Grade Hydraulic White Oils

Food Grade Hydraulic Fluids

Applications: The Omnilube WO series is a line of food grade hydraulic fluids that are formulated with USP grade white oils. These NSF approved food grade hydraulic fluids are engineered to meet the demanding requirements of severe hydraulic systems using high pressure and high output pumps.

Typical Industrial Applications: Hydraulic Systems, Hydraulic Systems containing gears and bearings, Gears, Bearings, Compressors, Vacuum Pumps, Slide Ways & Chains, Wipe Down Oil, Air Lines, Meat Processing Plants, Poultry Processing Plants, Food Processing (H-1)

Performance Benefits: Excellent compatibility with elastomers, seals, plastics, and paints, Complies with FDA 21 CFR 178.3570 H-1

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube WO 12


10 12.0 / 3.0 104 180 / 356 -45 / -49 0.83

Omnilube WO 22


22 20.8 / 4.2 106 210 / 410 -45 / -49 0.87

Omnilube WO 32


32 34.0 / 5.8 112 215 / 420 -41 / -41 0.86

Omnilube WO 46


46 47.3 / 7.2 112 232 / 450 -35 / -31 0.88

Omnilube WO 68


68 71.0 / 9.2 106 260 / 500 -33 / -27 0.87

Omnilube WO 100


100 103 / 11.8 104 263 / 505 -31 / -24 0.88

Omnilube WO 150


150 154 / 14.7 93 263 / 505 -29 / -20 0.89

Omnilube WO 220


220 222 / 19.3 98 263 / 505 -33 / -27 0.87

Omnilube WO 320


320 325 / 25.0 99 263 / 505 -31 / -24 0.87


Back To Top

Food Grade Gear White Oils

Food Grade Gear Lubricants

Applications: The Omnilube WO series is a line of food grade gear lubricants that are formulated with USP grade white oils. These NSF approved food grade gear lubricants are engineered to provide superior lubrication protection where food contact may occur.

Typical Industrial Applications: Bearings, Gear Sets, Pumps, Chain Applications, Meat Processing Plants, Poultry Processing Plants, Food Processing (H-1)

Performance Benefits: Made from USP grade white oils, Excellent compatibility with elastomers, seals, plastics, and paints, Complies with FDA 21 CFR 178.3570 H-1

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube WO 80


68 / 100 77 / 9.6 100 220 / 428 -34 / -29 0.88

Omnilube WO 90


150 / 220 190 / 18.3 97 190 / 374 -25 / -14 0.88

Omnilube WO 85W140


320 313.4 / 24.9 102 240 / 464 -24 / -11 0.88

Omnilube WO 140


460 452.6 / 33.7 110 190 / 374 -23 / -9 0.89

Omnilube WO 250


680 640 / 43.0 111 230 / 446 -20 / -4 0.90


Back To Top

Heat Transfer Oils

Food Grade Heat Transfer Fluids

Applications: The Omnilube HT series products are food grade heat transfer fluids formulated with USP grade white mineral oils. These colorless base oils are formulated with a combination of food grade antioxidants to give extended life at high temperatures. Omnilube HT 22, HT 32, HT 46 and HT 68 are designed for use in closed loop liquid phase heating systems <300°F. These NSF approved heat transfer fluids are non-corrosive to aluminum, steel, copper and brass. Typical Industrial Applications: Closed Heat Transfer Systems

Performance Benefits: Excellent deposit control and resistance to sludging, High thermal conductivity, Extended oil life, High flash point, Low pour point, Complies with FDA 21 CFR 178.3570 H-1

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube HT 22


22 20.8 / 4.2 106 210 / 410 -18 / 0 0.86

Omnilube HT 32


32 34 / 5.8 112 215 / 420 -12 / 10 0.86

Omnilube HT 46


46 47.3 / 7.2 112 232 / 450 -12 / 10 0.85

Omnilube HT 68


68 71 / 9.2 106 260 / 500 -12 / 10 0.85


Back To Top

Food Grade Air Line Oil

Food Grade Heat Transfer Fluids

Applications: Omnilube Air Line FG is a synthetic food grade oil that is formulated with the highest quality polyal- phaolefin (PAO) base oil to meet the lubrication requirements of air line equipment. This NSF approved lubricant is formulated with high performance antioxidants and anti-wear additives to meet the challenges of industrial environments. This product provides lubrication for all air line equipment used in food processing plants.

Typical Industrial Applications: Air Tools, Air Operated Processing Equipment, Air Operated Packaging Equipment, Air Operated Knives and Saws, Food Processing Equipment (H-1)

Performance Benefits: Designed specifically for air line lubrication, Protects against rust, Provides wear protection, Complies with FDA 21 CFR 178.3570 H-1

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Air Line FG


32 32 / 6.0 135 245 / 473 -50 / -58 0.83


Back To Top

Omnilube FGM Grease

Synthetic Food Grade Grease

Applications: Omnilube FGM 00, 0, 1, and 2 are multi-purpose premium polyalphaolefin (PAO)-based greases designed for use in a wide variety of industrial applications where FDA/USDA regulations specify H1 grease for “incidental food contact”. The Omnilube FGM Series of greases provide equipment protec- tion and performance characteristics expected in a premium quality synthetic grease. These premium greases provide long life, wide operating temperature range, very high load carrying capacity, excellent water washout, and anti-corrosion properties. These greases are designed for use in all types of food machinery, anti-friction bearings, low to medium speed industrial bearings, slide ways and enclosed gears. The Omnilube FGM series of greases out-perform other greases under wet conditions.

Typical Industrial Applications: Enclosed Gears, Slide ways, Anti-friction Bearings, Industrial Bearings – low to medium speeds, Industrial Food Machinery, Proofers – High Humidity areas, Food Processing (H-1)

Performance Benefits: Excellent mechanical stability, Excellent thermal and oxidative stability, Wide operating temperature range, Serviceable at -40°F and useful to 300°F continuous and 400°F intermittently, GCLB bearing rated, Complies with FDA 21 CFR 178.3570 H-1, Approved for use in Canada

Product NLGI # Thickener Color Base Oil Viscosity (40°C) Penetration (60) Drop Point (°F) NSF

Omnilube FGM 00


0 Calcium Sulfonate Tan PAO 180 400-430 570 H-1

Omnilube FGM 0


0 Calcium Sulfonate Tan PAO 100 355-385 570 H-1

Omnilube FGM 1


1 Calcium Sulfonate Tan PAO 75 310-340 570 H-1

Omnilube FGM 2


2 Calcium Sulfonate Tan PAO 46 265-295 570 H-1


Back To Top

USP/NF Grade White Oils

USP/NF Grade White Oils

Applications: Omnilube WO SV 22 and 100 are highly refined, purified USP Grade white mineral oils that are colorless, odorless, and tasteless. These premium white oils fully comply with USP and FDA requirements as per 21 CFR 172.878. Omnilube WO SV 22 is comparable to Witco’s Carnation, Penreco’s Drakeol 10, Mallet’s Exalube, Ultra lube, and Dlube products. Omnilube WO SV 100 is comparable to Puretol Grade 55, Witco’s Kadol, Penreco’s Drakeol 600, Mallet’s Prima lube and K-lube products.

Typical Industrial Applications: Bread Dividers, Dough Troughs, Use as a wipe down oil, Use as a diluent oil, Dust Suppression, Textile Fiber Applications

Performance Benefits: Edible, Colorless, Odorless, and Tasteless, USP Grade, Complies with FDA CFR 172.878 3H

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Omnilube WO SV 22


22 20 0.85

Omnilube WO SV 100


100 103 -20 0.86


Back To Top