Polyalphaolefin (PAO) Compressor Oils

PAO-Based Compressor Lubricants

Applications: The Chemlube PAO-based series is a line of full synthetic compressor oils that are formulated with the highest quality polyalphaolefin (PAO) base fluids. These 100% premium synthetic oils are used where maximum seal, paint, and plastic compatibility is required. Chemlube 221, 228, and 268 are designed for rotary screw applications and offer a service life of up to 8,000 hours under a wide range of temperatures under good operating conditions.
Chemlube 299 and 300 are designed for reciprocating compressors.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Reciprocating Compressors, Centrifugal Compressors, Vacuum Pumps

Performance Benefits: Outstanding thermal oxidative stability, Very low pour point, Wide operating temperature range, Non-detergent and ashless, Extended drain intervals / reduced oil disposal, Excellent vapor pressure characteristics, USDA H-2 authorized

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube 221


32 32 / 5.5 140 221 / 430 -54 / -65 0.84

Chemlube 228


46 48 / 7.9 134 251 / 483 -41 / -42 0.86

Chemlube 268


68 67 / 10.3 139 270 / 518 -41 / -42 0.86

Chemlube 299


100 99 / 14.5 150 246 / 475 -47 / -52 0.86

Chemlube 300


150 156.3 / 18.3 131 260 / 500 -45 / -49 0.86


Back To Top

Diester Compressor Oils

DIESTER-BASED COMPRESSOR LUBRICANTS

Applications: The Chemlube diester-based fluids are full synthetic compressor lubricants specially formulated with premium synthetic ester base stocks for use in a wide variety of air compressors. Chemlube 215, 229, and 230 are designed from diester base oils for rotary screw, rotary vane and reciprocating compressors offering a typical service life of 8,000 hours under good operating conditions. Chemlube 501 and 751 are designed from diester base oils for reciprocating compressors and are recommended for high pressure air compressors.

Chemlube 822 is a heavier weight formulated with premium triester base oils for use where an ISO 220 is required.

Chemlube 501 and 751 are recommended for reciprocating compressors and vacuum pumps using the following gases: Air, Butadiene, Carbon Dioxide (dry), Furnace (crack) Gas, Ethylene, Natural Gas, Helium, Hydrogen, Methane, Synthesis Gas, Hydrogen Sulfide (dry), Sulphur Hexafluoride, Propane, Carbon Monoxide, Nitrogen

Nominal Operating Range is -15°C to 230°C (5°F to 445°F)

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Centrifugal Compressors, Reciprocating Compressors

Performance Benefits: Outstanding thermal and oxidative stability, Will not varnish or form carbon deposits, Wide operating temperature range, Built in detergency action, Extended drain intervals reduces oil disposal, thus increasing cost effectiveness, Caution: May affect some paint finishes, plastics and seals, USDA H-2 authorized

Chemlube 215 carries the NSN #9150-01-068-0676 (quarts). Chemlube 501 carries the NSN #9150- 01-052-7562 (gallons); NSN #9150-01-025-8649 (pails); NSN #9150-01-240-4950 (drums).

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube 215


32 36.3 / 5.9 106 252 / 486 -48 / -54 0.96

Chemlube 229


46 45.4 / 6.5 89 252 / 485 -40 / -40 0.96

Chemlube 230


68 70 / 7 60 252 / 485 -38 / -35 0.96

Chemlube 501


100 99 / 10.2 83 260 / 500 -29 / -30 0.95

Chemlube 751


150 146.5 / 13.3 90 271 / 520 -34 / -30 0.93

Chemlube 822


220 222 / 18.6 92 >260 / >500 -34 / -30 0.92


Back To Top

Chemlube 800

TRI-ESTER BASED COMPRESSOR LUBRICANT

Applications: Chemlube 800 is a high viscosity synthetic lubricant formulated from a highly stable tri-ester base fluid. Chemlube 800 is designed for use in reciprocating compressors under adverse conditions of high temperature and high pressure.

Chemlube 800 is recommended for reciprocating compressors and vacuum pumps using the following gases:
Air Butadiene Carbon Dioxide (dry) Furnace (crack) Gas, Ethylene Natural Gas Helium Hydrogen, Methane Synthesis Gas Hydrogen Sulfide (dry) Sulphur Hexafluoride, Propane Carbon Monoxide Nitrogen, Nominal Operating Range is -15°C to 230°C (5°F to 445°F)

Typical Industrial Applications: Reciprocating Compressors, High Pressure Air Compressors, Vacuum Pumps, Gear Boxes, Chains

Performance Benefits: Outstanding thermal and oxidative stability, Will not varnish or form carbon deposits, Excellent heat transfer characteristics, Low volatility and low toxicity, Caution: May affect some paint finishes, plastics and seals.

Chemlube 800 is manufactured exclusively for BAUER COMPRESSORS, INC Norfolk, Virginia. To order, please contact Bauer at 1-844-500-5822 or email PartsSales@bauercomp.com

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube 800


150 141.5 / 12.8 79 279 / 535 -29 / -20 0.97


Back To Top

Chemlube Plus Series

SYNTHETIC COMPRESSOR LUBRICANTS

Applications: The Chemlube Plus Series is made with a thermal and oxidatively stable polyol ester (POE) blend. These full synthetic premium lubricants are formulated to form less varnish under high temperature applica- tions and to be more resistant to acidic intake air than the polyalkylene glycol coolants. Under normal operating conditions you can expect to obtain up to 11,000 hours of lubricant service life in rotary screw compressors.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Centrifugal Compressors and Vacuum Pumps.

Performance Benefits: Outstanding thermal and oxidative stability, Extended drain intervals reduces oil disposal, Wide operating temperature range, Excellent anti-wear protection, Compatible with most compressor oils and Improved safety – high flash point.

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube Plus 32


32 32 / 6.3 125 240 / 464 -50 / -58 0.88

Chemlube Plus 10


46 44.4 / 7.3 126 261 / 501 -41 / -42 0.89

Chemlube Plus 68


68 66 / 9.9 132 240 / 464 -40 / -40 0.89


Back To Top

Polyglycol (PAG) Compressor Coolants

Rotary Screw Compressor Lubricants

Applications: Ultrachem Coolant and Coolant 32 are developed from a unique premium blend of polyalkylene glycol (PAG) and esters which together form an exceptional coolant and act to reduce oxidation and deposit formation. They offer excellent heat transfer properties, long life, high flash points, low evaporation, low volatility, and excellent hydrolytic stability. They do not form varnish deposits like petroleum or PAO oils. Ultrachem Coolant and Coolant 32 are a less expensive alternative to our Ultrachem Coolant PE and Coolant 32 PE. We recommend the PE versions for applications involving high humidity, heat or other demanding conditions that may result in shorter life.

Typical Industrial Applications: Rotary Screw Compressors

Performance Benefits: 100% synthetic, Wide temperature range, Extended oil change intervals, Eliminates deposit formation, High flash points mean reduced fire hazards, Waste disposal is minimized due to longer life, Cost effective, Eliminates seasonal oil changes

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Coolant 32


46 46.1 / 8.1 148 254 / 490 -48 / -55 0.98

Coolant 32 PE


32 / 46 40 / 8.3 188 220 / 526 -48 / -55 0.99

Ultrachem Coolant


46 51.4 / 8.7 146 254 / 490 -45 / -50 0.98

UltraChem Coolant PE


46 45.4 / 9.6 202 265 / 509 -51 / -60 0.99

Ultrachem Coolant PE 68


68 69 / 11.9 170 254 / 490 -45 / -50 0.98


Back To Top

PGR Compressor Oils

SYNTHETIC COMPRESSOR LUBRICANTS

Applications: The PGR Series offers a new approach to synthetic lubricants and high performance in rotary screw air compressors and vacuum pumps. This series utilizes the latest technology available in combination with excellent lubricant additive systems. The PGR Series is a low cost alternative to the coolant compressor oils. The service life is 6,000 hours under good operating conditions.

Typical Industrial Applications: Rotary Screw Compressors, Vacuum Pumps

Performance Benefits: Compatible with most oils, Designed for rotary screws, Protects against rust, Excellent demulsibility, Easy conversion from PAO or mineral oils, Provides wear protection

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

PGR 32


32 36.3 / 6.7 115 252 / 486 -39 / -38 0.88

PGR 46


46 46.9 / 7.3 126 254 / 489 -33 / -36 0.88


Back To Top

Polyol Ester (POE) Compressor Oils

POLYOL ESTER LONG-LIFE COMPRESSOR LUBRICANTS

Applications: The Chemlube 900 series fluids are full synthetics and have been formulated from premium polyol ester (POE) base stocks to achieve long life for compressor applications. These products are greater than 90% biodegradable as measured by the CEC L33 biodegradability test. New additive technology assures long lasting protection.

Chemlube 922, 932, 946, and 968 are designed for rotary screw compressors with a long service life of 10,000 – 12,000 hours under good operating conditions. Chemlube 9100 is designed for reciprocating compressors.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Reciprocating Compressors, Centrifugal Compressors, Vacuum Pumps

Performance Benefits: Same base fluid as used in jet aviation (Polyol ester), Superior to petroleum, PAO, or synthetic diesters, Outstanding thermal stability, Built in detergency action, Extended drain intervals reduces oil disposal, thus increasing cost effectiveness, Generally recognized as being biodegradable and virtually nontoxic, Caution: May affect some paint finishes, plastics and seals

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube 922


22 20 / 4.4 131 241 / 465 -60 / -76 1.05

Chemlube 932


32 34.4 / 6.0 119 252 / 485 -57 / -70 1.01

Chemlube 946


46 48.5 / 7.7 125 271 / 520 -51 / -60 0.97

Chemlube 968


68 64.9 / 9.0 114 266 / 511 -43 / -45 0.96

Chemlube 9100


100+ 134 / 13 130 299 / 570 -34 / -29 1.01


Back To Top

Silicone Compressor Oils

Applications:
Platinum BTG is a super premium synthetic silicone compressor fluid designed to replace OEM silicone fluids in rotary screw compressors. This product is specially formulated with silicone base fluids and appropriate additives to perform over an extremely long period of time. It is fortified against rust, corrosion, oxidation and wear. BTG may be added directly to 24KT.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Centrifugal Compressors

Performance Benefits: Outstanding thermal and oxidative stability, Compatible with OEM silicone fluids, Wide operating temperature range, High film strength, Extreme long life fluid, Excellent rust and corrosion control

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Platinum BTG


32 38.3 / 16 429 302 / 575 -54 / -65 0.92


Back To Top

Advanced Synthetic Blend Oils

Long-life Synthetic Compressor Oils

Applications: The Chemlube 446 is a unique blend of synthetic base oils and additives that provide exceptional performance characteristics combined with unprecedented value in a long-life synthetic compressor oil. This is the quality synthetic to use when replacing branded products from compressor manufacturers or other sources. As a full synthetic, the Chemlube 446 series extends service life to 6,000 – 8,000 hours under good operating conditions in rotary screw compressors and offers good life in reciprocating and vane compressors.
Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Reciprocating Compressors, Centrifugal Compressors

Performance Benefits: Exceptional cost-performance, Improved safety – High Flash Point, Excellent material compatibility, Built-in oxidation stability

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube 446-46


46 45.2 / 7.5 130 240 / 464 -39 / -38 0.86

Chemlube 446-68


68 73 / 8.6 87 221 / 430 -33 / -27 0.91

Chemlube 446-100


100 107 / 11.8 99 221 / 430 -30 / -22 0.91


Back To Top

Ulterra Series

Synthetic Compressor Oil

Applications: The Ultrachem Ulterra Series of synthetic lubricants was designed to provide superior performance over mineral oils in air compressor applications. Under normal operating conditions, Ultrachem Ulterra can be expected to provide 8,000 plus hours of service life. Formulated from a blend of premium synthetic base stocks, these fluids will keep the compressor running clean and trouble-free during its life cycle. Ultrachem Ulterra offers a cost-effective solution to lubrication of compressed air systems and is compatible with most air compressor fluids on the market. This series is not compatible with silicone or polyglycol based fluids.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Rotary Screw Vacuum Pumps, Reciprocating Compressors, Centrifugal Compressors, Rotary Vane Vacuum Pumps

Performance Benefits: Extended oil change intervals compared to petroleum oils, Superior film strength, Excellent anti-wear properties, High flash point, Low pour point

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Ulterra 32


32 32 / 6 146 234 / 453 <-45 / <-50 0.85

Ulterra 46


46 47.4 / 8.17 146 259 / 498 <-45 / <-50 0.86

Ulterra 68


68 69.2 / 10.32 134 248 / 478 -35 / -31 0.87

Ulterra 100


100 99.5 / 13.71 138 248 / 478 -35 / -31 0.87


Back To Top

“S” Series Compressor Oils

SYNTHETIC COMPRESSOR LUBRICANTS

Applications: The “S” Series is a line of full synthetic lubricants for high performance in rotary screw air compressors and vacuum pumps. The “S” Series utilizes the latest technology available in combination with excellent lubricant additive systems to provide the performance of a synthetic at a less expensive cost. The “S” Series are made from a severely hydro-treated, hydro-cracked hydrocarbon base fluid.

32S, 46S, and 68S are designed for rotary screw compressors and yield a service life of 6,000 hours in rotary screw compressors at wide temperatures in good operating conditions. 100S and 150S are designed for reciprocating compressors.

Typical Industrial Applications: Rotary Screw Compressors, Centrifugal Compressors, Rotary Vane Compressors, Vacuum Pumps, Reciprocating Compressors

Performance Benefits: Compatibility with most synthetics including PAO’s and esters, Excellent rust protection, Excellent demulsibility, Easy conversion from PAO or mineral oils, Superior wear protection

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

S Series 100S


100 95.4 / 12.4 124 240 / 464 -31 / -23 0.86

S Series 150S


150 153 / 17 120 240 / 464 -30 / -22 0.86

S Series 32S


32 36.6 / 6.5 130 240 / 464 -42 / -44 0.85

S Series 46S


46 45.2 / 7.5 130 240 / 464 -39 / -38 0.86

S Series 68S


68 67 / 9.9 132 240 / 464 -33 / -27 0.86


Back To Top

Ultra-Tec

Compressor Lubricant

Applications: ULTRA-TEC is made from a severely hydro-treated, hydro-cracked hydrocarbon base fluid and designed especially for portable compressor applications. ULTRA-TEC has been formulated with excellent anti-wear and high film- strength properties to provide the superior lubricating performance required for the severe service conditions in the portable compressor industry. This lubricant is designed to extend portable compressor life well beyond the standard motor oils and hydraulic fluids typically used in this service.

Typical Industrial Applications: Rotary Screw Compressors

Performance Benefits: Superior lubricating film strength, Compatible with all seal materials, Excellent rust & oxidation protection, Superior wear protection, Excellent low temperature performance, Reduced foaming & fluid loss in severe service conditions, Cleaner running operation, more resistant to varnish

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Ultra-Tec


32 / 46 38 / 7.82 183 226 / 439 -44 / -47 0.85


Back To Top

Partial Synthetic Compressor Oils

The Ultrachem PS Series is a blend of synthetic and premium petroleum base fluids designed for use in rotary screw, rotary vane and reciprocating air compressors. The unique additive systems and highest quality synthetic components in these products make them greatly superior to petroleum products. Ultrachem PS Series extends service life up to 4,000 hours in rotary screw compressors under good operating conditions.

Typical Industrial Applications: Rotary Screw Compressors, Reciprocating Compressors, Rotary Vane Compressors, Centrifugal Compressors

Performance Benefits: Extended oil change intervals compared to petroleum oils (3 X service life), Superior film strength, Excellent anti-wear properties, High flash point, Low pour point

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

PS 32


32 32 / 6 146 216 / 420 -33 / -27 0.90

PS 46


46 44.5 / 7.8 145 221 / 430 -36 / -33 0.91

PS 68


68 73 / 8.6 87 221 / 430 -33 / -27 0.91

PS 100


100 107 / 11.8 99 221 / 430 -30 / -22 0.91

PS 150


150 148 / 15.3 105 224 / 435 -24 / -11 0.91

PS 220


220 232 / 20.8 105 224 / 435 -26 / -15 0.91


Back To Top

P-ACO Series

PREMIUM PETROLEUM LUBRICANTS

Applications: The P-ACO Series is a group of high performance, multifunctional lubricants designed for use in many industrial applications. These are considered environmentally friendly since they are zinc free. These premium petroleum oils are Ultrachem’s answer for petroleum oils where OEM specifications are critical. They are very useful where frequent change outs are necessary due to poor environments prone to contamination from dust, acids, solvents, gases, or other contaminants. The P-ACO Series has a service life of 2,000 – 3,000 hours under good operating conditions in rotary screw compressors and up to 2,000 hours in reciprocating compressors.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Centrifugal Compressors, Reciprocating Compressors

Performance Benefits: Vacuum Pumps, High Pressure Hydraulic Systems, High Pressure Turbines, Excellent rust and oxidation inhibitors, Will not foam, Great demulsibility, Meets: General Electric GEK -28143A & GEK-46506D; Denison HF-1; Cincinnati-Milacron P-38, P-45, P-54, P-55, P-57, P-62; U.S. Steel 126; DIN 51524 Part 1; MIL-H-17672C; Westinghouse TLV 9013 04.

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

P-ACO 100


100 95 / 11.5 109 226 / 439 -15 / 5 0.88

P-ACO 150


150 159 / 15.9 102 232 / 439 -15 / 5 0.89

P-ACO 22


22 22 / 4.7 136 204 / 400 -30 / -22 0.85

P-ACO 220


220 240 / 20.8 105 260 / 450 -12 / 10 0.87

P-ACO 32


32 34 / 5.3 136 204 / 400 -30 / -22 0.87

P-ACO 46


46 45 / 7.3 120 210 / 410 -24 / -11 0.87

P-ACO 460


460 437 / 30 98 271 / 520 -10 / 15 0.89

P-ACO 68


68 69 / 9.3 112 217 / 424 -21 / -6 0.87

PAC-Xtra 100


100 104.9 / 12.2 108 220 / 428 -20 / -4 0.89

PAC-Xtra 150


150 156.1 / 15.4 100 226 / 438 -20 / -4 0.89

PAC-Xtra 32


32 32.0 / 5.6 113 206 / 402 -34 / -29 0.87

PAC-Xtra 46


46 44.9 / 6.9 108 217 / 422 -30 / -22 0.88

PAC-Xtra 68


68 70.8 / 9.1 103 217 / 422 -24 / -11 0.88


Back To Top

Centrifugal Compressor Oils

Applications: The Chemlube CF32 and CF46 are formulated with the highest quality polyalphaolefin (PAO) base oils. These 100% premium synthetic oils are designed for use in centrifugal compressors. The carefully designed additive package in Chemlube CF oils provide anti-wear properties to protect the bull gears which operate at 1200-3600 RPM. At the same time, the Chemlube CF oils lubricate and protect the high speed (30,000-50,000 RPM) impeller bearings. Chemlube CF oils have been used successfully for many years in large and small centrifugal compressors. They offer a service life of 12,000 hours in centrifugal compressors in good operating conditions.

Typical Industrial Applications: Centrifugal Compressors

Performance Benefits: Energy savings – generally 3-5%, Greatly extended oil change intervals (5X petroleum), Eliminates or reduces varnish and shellac on critical component surfaces, Increased thermal and oxidative stability over petroleum oils, High flash point helps reduce fire hazards, Gearboxes run cooler due to reduced friction, Excellent anti-wear additives, Wide operating temperature range and high viscosity index

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube CF 32


32 31.1 / 5.8 127 240 / 464 -48 / -54 0.86

Chemlube CF 46


46 47.3 / 7.9 136 240 / 464 -48 / -54 0.86

Chemlube CV


15 14 / 3 120 230 / 446 -65 / -85 0.95

Ultra Gold


32 30.8 / 6.3 160 227 / 441 -54 / -65 0.99


Back To Top

Synthetic PD Blower Oil

Premium Synthetic Lubricant

Applications: Synthetic PD Blower Oil is formulated from premium polyalphaolefin (PAO) base fluids, optimized for use in positive displacement blowers and vacuum pumps. Custom blended to provide outstanding protection even in demanding operating conditions. Synthetic PD Blower Oil is designed to withstand blower discharge temperatures up to 250o F. Formulated for maximum equipment life and minimal blower wear. Compatible with a wide variety of seal materials including, Teflon, fluorosilicone, polysulfide, polyacrylic, Viton, fluorocarbon and nitrile Buna-N.

Typical Industrial Applications: Positive Displacement Blowers, Positive Displacement Vacuum Pumps

Performance Benefits: High Viscosity Index, Wide Operating Temperature Range, Excellent Demulsibility, Superior Rust and Corrosion Protection, Longer Service Life and Improved Performance Over Mineral Oils

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Synthetic PD Blower Oil


220 230.4 / 24.14 131 262 / 504 -35 / -31 0.87


Back To Top

Natural Gas Compressor Oils

Chemlube NGC Series

Natural Gas Compressor Lubricants

Applications: The Chemlube NGC products are full synthetic blends, formulated utilizing superior base stock fortified with a proprietary additive package. Chemlube NGC 100 and 150 were designed to inhibit the formation of varnish and carbon build-up and also will protect against thermal break down and extend oxidative stability. They provide extended equipment life and decrease lubricant drain intervals.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Centrifugal Compressors, Reciprocating Compressors

Performance Benefits: Excellent film strength, Good compatibility with most base oils, Good oxidative stability, High flash point

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube NGC 100


100 97.3 / 16.0 178 252 / 486 -36 / -33 0.88

Chemlube NGC 150


150 151 / 18.1 139 252 / 486 -36 / -33 0.88


Back To Top

Chemlube NGE Series

Natural Gas Engine Lubricants

Applications: The Chemlube NGE products are full synthetic ester/polyalphaolefin (PAO)-based gas engine oils. The NGE Series are low ash oils that have been developed for four-cycle gas engines that are naturally aspi- rated to slightly turbocharged. Chemlube NGE Synthetic Oil Series provide low temperature pump-ability for remote engines operated in cold weather or intermittently. They are suitable for use in Caterpillar, Cooper-Bessemer, Cooper Superior, Cummins, Dresser-Rand Category I & II and Waukesha.

Chemlube NGE Synthetic Oil Series are appropriate for use in most industrial power plants fueled by dry, sweet natural gas. They provide low carbon formation, resistance to oxidation and nitration and superior deposit control due to the 100% synthetic base and select additives.

Typical Industrial Applications: Engines, Reciprocating Compressors

Performance Benefits: Superior resistance to nitration and oxidation, Excellent deposit control for pistons, spark plugs, ports and combustion chambers due to a low ash formula, Outstanding protection against corrosion and wear

Product SAE Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube NGE 5W-40


182 84.4 / 15.5 182 >121 / >250 -46 0.89

Chemlube NGE 20


20W 70 / 8.5 90 >121 / >250 -46 0.87

Chemlube NGE 30


30W 83.98 / 12.0 137 >121 / >250 -46 0.87


Back To Top

Chemlube NGBR Series

Natural Gas Compressor Lubricants

Applications: The Chemlube NGBR fluids are synthetic lubricants formulated for smaller booster or recovery com- pressors, using superior synthetic base stocks and select additives. They are superior to conventional petroleum-based oils and will inhibit the formation of varnish and carbon build-up. Chemlube NGBR 20W and 30W allow for extended equipment life and decrease lubricant drain intervals, reducing the waste oil disposal costs and extending equipment life.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Centrifugal Compressors, Reciprocating Compressors

Performance Benefits: Excellent film strength, Compatibility with most base oils, Excellent oxidative stability, Reduced maintenance costs, Extended equipment life and drain intervals

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

Chemlube NGBR 20W


46 50.0 / 8.75 154 253 / 489 -49 / -56 0.88

Chemlube NGBR 30W


100 96.9 / 13.4 139 248 / 479 -49 / -56 0.88


Back To Top

Water Soluble PAG (PGWS)

Premium PAG-Based Lubricants

Applications: The PGWS series fluids are full synthetic lubricants formulated with premium polyalkylene glycol (PAG) base oils. The PGWS lubricants are designed for use in compressors, vacuum pumps, enclosed gears, bearings, and other applications where unique properties of these fluids are necessary. The use of the PGWS oils in gas compression preserves the unique viscosity-temperature relationships of these premium products by resisting thinning out by hydrocarbon dilution. PGWS lubricants yield a compressor service life of 8,000 – 10,000 hours under good operating conditions.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Centrifugal Compressors, Reciprocating Compressors, Vacuum Pumps, Enclosed gears and bearings

Performance Benefits: Resists hydrocarbon washout/dilution, Extended drain life, Reduced sludge and deposit formation, Excellent oxidative and thermal stability

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

PGWS 68


68 71 / 14.4 208 227 / 440 -46 / -50 1.0-1.1

PGWS 100


100 93.3 / 17.9 211 227 / 440 -44 / -47 1.0-1.1

PGWS 150


150 150 / 24.6 218 270 / 530 -42 / -44 1.0-1.1

PGWS 220


220 220 / 38 225 280 / 540 -37 / -35 1.0-1.1

PGWS 320


320 340.6/58 240 280/540 -35 / -29 1.0-1.1


Back To Top

Water Insoluble PAG (PGWI)

PREMIUM PAG-BASED LUBRICANTS

Applications: The PGWI Series fluids are full synthetic lubricants formulated with superior polyalkylene glycol (PAG) base oils. These premium lubricants are designed for use in compressors and vacuum pumps compressing polar gases, such as NH3, CO2, and propane. They offer excellent rust resistance and are excellent in wet gas compression. The PGWI Series yield a compressor service life of 8,000 – 10,000 hours under good operating conditions.

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Centrifugal Compressors, Reciprocating Compressors, Vacuum Pump

Performance Benefits: Resists hydrocarbon washout/dilution, Extended drain life, Reduced sludge and deposit formation, Excellent oxidative and thermal stability

Product ISO Grade Viscosity @
40°C / 100°C
Viscosity
Index
Flash Point
°C / °F
Pour Point
°C / °F
Specific
Gravity

PGWI 46


46 46 / 9.4 191 210 / 415 -50 / -60 0.98

PGWI 68


68 69 / 12.9 193 230 / 445 -40 / -40 0.98

PGWI 100


100 106 / 18.9 195 230 / 445 -40 / -40 0.98

PGWI 150


150 154 / 25.7 195 230 / 445 -38 / -36 0.99

PGWI 220


220 220 / 34.5 205 230 / 445 -38 / -36 0.99


Back To Top